Search results for: 'velfoamtm ii velstraptm'
- Cricket II Patient Transfer Aid Item Code: MS31579FREE ShippingThe Cricket II represents real value for money and is a highly versatile Patient Transfer Aid that combines the functionality of both a stand aid hoist and a patient turner.Special Price £999.95 with VAT ReliefWas: £1,295.00Save: £295.05£1,199.94inc VATHurry!
Offer ends 01-04-2024 -
- Raizer 2 Emergency Lifting Chair Item Code: MS37307FREE Shipping
The Raizer 2 Emergency Lifting Chair is a battery-operated chair that is designed to help a fallen person up to an almost standing position in just a few minutes. This Emergency Lifting Chair is perfect for use in home care, institutions, rescue services and other services requiring a lifting aid and transfer of persons with limited mobility.
Special Price £4,194.95 with VAT ReliefWas: £4,999.95Save: £805.00£5,033.94inc VATHurry!
Offer ends 01-04-2024 - The Original Jacknobber II Item Code: MS10392The Original Jacknobber II is a handheld massage tool that has been ergonomically designed to provide a pleasing and relaxing massage to any part of the body with varying amounts of pressure depending on the user's preference.Special PriceWas: £19.30Save: £5.54£13.75inc VATHurry!
Offer ends 01-04-2024Sold Out - OxyCycle II Powered Pedal Exerciser Item Code: MS18983FREE Shipping
The OxyCycle II Powered Pedal Exerciser is a truly invaluable, low-impact exercise machine that has been designed for use at home.
Special Price £269.95 with VAT ReliefWas: £339.99Save: £70.04£323.94inc VATHurry!
Offer ends 01-04-2024Sold Out - Easireach II - Folding Item Code: MS16212Easireach II - FoldingMade from lightweight aluminium, this reacher is designed for people with limited reach or strength. The jaw opening is highly visible and features a slip resistant surface for a secure hold on the object. Constructed with a cord running through the tube, which operates the plastic jaw. This cord style allows the reacher to be folded in the centre for ease of storage and transportation. All models include a magnet tip, a hook for dressing, a rubber lined jaw and a device that allows the reacher to be clipped to a stick or walker.Size: 81cm (32")Special Price £9.94 with VAT ReliefWas: £11.29Save: £1.35£11.93inc VATHurry!
Offer ends 01-04-2024Sold Out - Easireach II - Small Item Code: MS16207Easireach II - SmallMade from lightweight aluminium, this reacher is designed for people with limited reach or strength. The jaw opening is highly visible and features a slip resistant surface for a secure hold on the object. Constructed with a cord running through the tube, which operates the plastic jaw. This cord style allows the reacher to be folded in the centre for ease of storage and transportation. All models include a magnet tip, a hook for dressing, a rubber lined jaw and a device that allows the reacher to be clipped to a stick or walker.Size: 38cm (15")Special Price £7.91 with VAT ReliefWas: £8.99Save: £1.08£9.49inc VATHurry!
Offer ends 01-04-2024Sold Out - Easireach II - X Large Item Code: MS16210Easireach II - X LargeMade from lightweight aluminium, this reacher is designed for people with limited reach or strength. The jaw opening is highly visible and features a slip resistant surface for a secure hold on the object. Constructed with a cord running through the tube, which operates the plastic jaw. This cord style allows the reacher to be folded in the centre for ease of storage and transportation. All models include a magnet tip, a hook for dressing, a rubber lined jaw and a device that allows the reacher to be clipped to a stick or walker.Size: 81cm (32")Special Price £8.18 with VAT ReliefWas: £9.29Save: £1.11£9.82inc VATHurry!
Offer ends 01-04-2024Sold Out - Easireach II - Folding - Small Item Code: MS16211Easireach II - Folding - SmallMade from lightweight aluminium, this reacher is designed for people with limited reach or strength. The jaw opening is highly visible and features a slip resistant surface for a secure hold on the object. Constructed with a cord running through the tube, which operates the plastic jaw. This cord style allows the reacher to be folded in the centre for ease of storage and transportation. All models include a magnet tip, a hook for dressing, a rubber lined jaw and a device that allows the reacher to be clipped to a stick or walker.Size: 66cm (26")Special Price £8.18 with VAT ReliefWas: £9.29Save: £1.11£9.82inc VATHurry!
Offer ends 01-04-2024Sold Out - Victron Impulse II Mobility Charger - 24V 8A Item Code: MS31521FREE ShippingA reliable battery charger with a long service life. There is a rubber bumper available for the Impulse II Battery Charger. The IP65 Charger is already protected against dust, and water spray - now you can protect it from accidental damage too. This rubber bumper allows it to withstand the knocks and bangs of workshop life. It will extend the life of your charger, and it has an easy-carry handle, ...or hang it from a hook when not in use. Mobility and independence are the keywords when it comes to using an electric wheelchair or scooter; the freedom to decide for yourself where to go. So of course, it’s important to be able to take your mobility scooter with you. To this end, you can rely on smart solutions from Victron Energy The multifunctional Impulse II battery charger is suitable for mobility scooters and electric wheelchairs. Most mobility scooters are fitted with two 12-volt batteries which are connected in series. Together they generate a current of 24 volts. The Impulse II is suitable for 24 volts and a variety of batteries, such as GEL batteries, AGM batteries and wet batteries. The Impulse II combines versatility with safety. For example, the battery charger has double insulation and is protected against reversed polarity, overvoltage and overheating. The Impulse II’s compact and lightweight design allows you tostore it without any problem in a shed or storage space. The charger can be quite easily moved or taken with you. XLR plugThe Impulse II comes with a so-called “XLR plug” which is the universal standard for mobility scooters and electric wheelchairs. Specifications Input voltage: 230 VAC (range 180-265 VAC) Frequency: 50/60 Hz (range 45-65 Hz) Efficiency: 95% Power consumption in no-load operation: 0.5 W Charge voltage 'absorption': 28.8 V Charge voltage 'float': 27.6 V Charge voltage ‘storage': 26.4 V Charge algorithm: 4-stage adaptive Charge current: 8A Minimum battery capacity: 50AH Protection: Reverse polarity, output short circuit, Over temperature Weight: 1.3Kgs Dimensions (h x w x d): 60 x 105 x 190 mm Adaptive 4-stage charge algorithm: bulk – absorption – float – storageThe Impulse II charger features a microprocessor-controlled ‘adaptive’ battery management system. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Storage mode: less maintenance and ageing when the battery is not in useThe storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode, float voltage is reduced to 2,2V/cell (26,4V for a 24V battery) to minimize corrosion of the positive plates and loss of liquid due to gassing. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure. The Impulse II is a battery to set your mind at ease. It has a fully automated charging programme which optimises battery recharging. This 4-phase charging curve guarantees the best possible service life for your battery. During the charging process, the charger goes through three different phases. The first sees high-power charging of the battery up to approx. 80% capacity. The last 20% or so is charged at lower power as part of the second phase. The third and final phase ensures that the batteries stay fully charged. During the last phase, you can disconnect the charger from the mobility scooter. Protected against overheatingOutput current will reduce as ambient temperature increases up to more than 30°C, but the charger will not be disabled.Two LED’s for status indicationRed LED: bulk, absorptionGreen LED: float, storage en repeated absorption (refresh)Both LEDs flashing: connected with reverse polarity, short circuit, over-voltage£104.69 with VAT Relief£125.63inc VATSold Out
- Victron Impulse II Mobility Charger - 24V 6A Item Code: MS31520FREE ShippingThe multifunctional Impulse II battery charger is suitable for mobility scooters and electric wheelchairs. Most mobility scooters are fitted with two 12-volt batteries which are connected in series.Together they generate a current of 24 volts. The Impulse II is suitable for 24 volts and a variety of batteries, such as GEL batteries, AGM batteries and wet batteries. The Impulse II combines versatility with safety. For example, the battery charger has double insulation and is protected against reversed polarity, overvoltage and overheating. The Impulse II’s compact and lightweight design allows you tostore it without any problem in a shed or storage space. The charger can be quite easily moved or taken with you. A reliable battery charger with a long service life. There is a rubber bumper available for the Impulse II Battery Charger. The IP65 Charger is already protected against dust, and water spray - now you can protect it from accidental damage too. This rubber bumper allows it to withstand the knocks and bangs of workshop life. It will extend the life of your charger, and it has an easy-carry handle, ...or hang it from a hook when not in use. Mobility and independence are the keywords when it comes to using an electric wheelchair or scooter; the freedom to decide for yourself where to go. So of course, it’s important to be able to take your mobility scooter with you. To this end, you can rely on smart solutions from Victron Energy XLR plugThe Impulse II comes with a so-called “XLR plug” which is the universal standard for mobility scooters and electric wheelchairs. Specifications Input voltage: 230 VAC (range 180-265 VAC) Frequency: 50/60 Hz (range 45-65 Hz) Efficiency: 95% Power consumption in no-load operation: 0.5 W Charge voltage 'absorption': 28.8 V Charge voltage 'float': 27.6 V Charge voltage ‘storage': 26.4 V Charge algorithm: 4-stage adaptive Charge current: 6A Minimum battery capacity: 40AH Protection: Reverse polarity, output short circuit, Over temperature Weight: 1.3Kgs Dimensions (h x w x d): 60 x 105 x 190 mm Adaptive 4-stage charge algorithm: bulk – absorption – float – storageThe Impulse II charger features a microprocessor-controlled ‘adaptive’ battery management system. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Storage mode: less maintenance and ageing when the battery is not in useThe storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode, float voltage is reduced to 2,2V/cell (26,4V for a 24V battery) to minimize corrosion of the positive plates and loss of liquid due to gassing. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure. Protected against overheatingOutput current will reduce as ambient temperature increases up to more than 30°C, but the charger will not be disabled.Two LED’s for status indicationRed LED: bulk, absorptionGreen LED: float, storage en repeated absorption (refresh)Both LEDs flashing: connected with reverse polarity, short circuit, over-voltage The Impulse II is a battery to set your mind at ease. It has a fully automated charging programme which optimises battery recharging. This 4-phase charging curve guarantees the best possible service life for your battery. During the charging process, the charger goes through three different phases. The first sees high-power charging of the battery up to approx. 80% capacity. The last 20% or so is charged at lower power as part of the second phase. The third and final phase ensures that the batteries stay fully charged. During the last phase, you can disconnect the charger from the mobility scooter.£104.69 with VAT Relief£125.63inc VATSold Out